15
9.5 Analog outputs
Type 67-00-23, see Installations manual 5512-369 (DK-GB-DE).
9.6 Lon Works
Type 67-00-24, see Installations manual 5512-396 (DK) or 5512-403 (GB).
9.7 Wireless M-Bus, type 67-00-30
The radio module has been designed to form part of the hand-held Wireless M-Bus
Reader systems of Kamstrup A/S using license-free radio frequency (868 MHz).
The module fulfils the C-mode specifications of prEN13757-4 and can, thus, also be
part of other systems using wireless M-Bus C-mode communication.
The module comes with internal antenna and connection for external antenna as
well as two pulse inputs, which are identical with the previously described pulse
inputs.
9.8 ZigBee + pulse inputs, type 67-00-60
The ZigBee module is used for wireless communication and can form part of a
remote reading system, enabling several units to communicate with each other.
The pulse inputs of this module are identical with the previously described pulse
inputs.
The ZigBee module (67-00-60) requires mains supply.
9.9 Metasys N2 + pulse input, type 67-00-62
The N2 module is used for data communication between meters and N2 Masters in
a Johnson Controls System.
The RS485 port is galvanically separated from the meter.
The pulse inputs of this module are identical with the previously described pulse
inputs.
The N2 module (67-00-62) requires mains supply.
To Next Page
Loading...
Need help?
General
