KANE905 Operators Manual Page 17
The in-line particle filter is clean and does not become blocked.
NORMAL SHUTDOWN SEQUENCE
DO THIS EVERY TIME YOU USE THE ANALYSER
Remove the probe from the flue - TAKE CARE! THE PROBE WILL BE
HOT - and allow it to cool naturally. Do not immerse the probe in water
as this will be drawn into the analyser and damage the pump and
sensors.
Once the probe is removed from the flue press and the analyser
will count down from 30 to switch off.
If you have not finished but press by mistake, you can press
to return to normal operation and not switch OFF.
To Next Page
Loading...
