KANE905 Operators Manual Page 32
. You can now look at the first sample using the and keys.
The ‘*’s indicate that you are in the Average of Three mode and by the
position of the ‘*’ which sample you are currently viewing. Press
to pass to the next sample. Eventually you will be looking at the
averages. This is indicated by the bottom ‘*’ being shown. Press
a final time to exit from that mode. (To exit from this mode early,
press , then , then .
PRINTING
Get into the average of three viewing mode, “Ave View” as above. Offer
a printer to the instrument in the usual way. Press . The print
out omits any reading flagged as NOT FITTED.
To Next Page
Loading...
