Instructions for use ELECTROmatic M/C and PM/PC
3 Description of the product | 3.10 Symbols on the nameplate of the type 4882 power supply
Electrical ratings
Supply voltage 100 to 240 V AC, 47 to 63 Hz
Output voltage 36 V DC
Power 120 W
Current 3.34 A
Overvoltage category II
Line voltage fluctuations ± 10 %
Requirements
Class of protection I
Protection class IP 40
Ambient conditions
Permissible installation sites Indoor use
Permissible ambient temperature
range
0
o
C to +40
o
C / 32
o
F to 104
o
F
Relative humidity 10 to 95% RH non-condensing
Pollution degree 2
Permissible up to 3,000 m / 9843 feet altitude
Atmospheric pressure limitation 700 to 1060 hPa
Transportation and storage conditions
Ambient temperature -20 ℃ to +80 ℃ / -4
o
F to 176
o
F
Relative humidity 10 to 95% RH non-condensing
Air pressure 700hPa to 1060hPa
3.10 Symbols on the nameplate of the type 4882 power
supply
The nameplate is located on the underside of the device.
Certification
TÜV Rheinland mark
UL mark for components for USA/Canada
CE mark
29 / 78
To Next Page
Loading...
Need help?
General
