KaVo ESTETICA E50 - Preparation of the Patient Unit; Preparation of the Tumbler; Preparation of the Tumbler Holder and Filler

▶ Hold the napkin under the sieve seat, and pull the sieves out of the housing.
▶ If needed, insert a new sieve insert (Mat. no. 0.763.3423) into the seat.
▶ Wipe the suction tubes with disinfectant.
2.6 Preparation of the patient unit
2.6.1 Preparation of the tumbler
▶ Reprocess as specified by the manufacturer.
2.6.2 Preparation of the tumbler holder and filler
Cleaning and disinfection of the tumbler holder and filler
Note
When assembling, make sure that the O-ring is presence on the tumbler filler.
Care instructions ESTETICA E50
2 Setup methods according to DIN EN ISO 17664 | 2.6 Preparation of the patient unit
16/32