EasyManua.ls Logo

KaVo ESTETICA E50 - Preparation of the Spittoon; Automatic Hygiene Function of the Water-Conducting System

KaVo ESTETICA E50
36 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
2.6.3 Preparation of the spittoon
Cleaning and disinfection of the spittoon bowl
CAUTION
Damage caused by inappropriate cleaning agents.
▶ Do not use acid-containing, sand-containing, and form-forming cleaning
agents.
▶ Add a dose of DEKASEPTOL gel to the spittoon bowl and distribute the agent
with a brush.
▶ For cleaning, allow the gel to act for approx. 5 minutes.
▶ For disinfection, allow the gel to act for approx. 15 minutes.
▶ After letting it work, press the "Spittoon bowl" button.
▶ Clean the spittoon bowl thoroughly using a brush.
▶ For thorough cleaning or thermodisinfection, rotate the spittoon bowl counter‐
clockwise and lift it.
CAUTION
Damage caused by thermodisinfection.
▶ Do not subject spittoon bowls made of glass to thermodisinfection.
The spittoon bowl made of porcelain can be subjected to thermodisinfection.
2.7 Automatic hygiene function of the water-conducting system
Note
Intensive disinfection kit required.
Care instructions ESTETICA E50
2 Setup methods according to DIN EN ISO 17664 | 2.7 Automatic hygiene function of the water-conducting
system
18/32