Dosing attachment: (Mat. no. 1.002.0287)
Removing and cleaning the water bottle
▶ Slowly turn the water bottle counterclockwise to take it off.
Note
This allows the over-pressure to be released slowly from the water bottle.
CAUTION
Damage caused by inappropriate cleaning of the water bottle.
The material of the water bottle is destroyed.
▶ Do not rinse the water bottle with water hotter than 50°C.
▶ Do not clean the water bottle in the dish washer.
▶ For cleaning, rinse the water bottle with water at less than 50 °C.
Filling the water bottle with the dosing facility.
▶ Remove the protective hose from the tube of the oxygenal dosing facility.
▶ Guide the tube through the orifice of the coarse sieve of the oxygenal bottle.
Care instructions ESTETICA E50
3 Replenish and check the disinfectant | 3.1 Replenish oxygenal
29/32
To Next Page