▶ Screw the oxygenal dosing facility tightly onto the oxygenal bottle.
▶ Rotate the orifice in the lid to a filling level of 1.5 litres.
Lid snaps-in in the filling position.
▶ Place the oxygenal bottle on a level surface.
▶ Press the lid down until the dosing quantity is over-filled.
In response to over-filling, the excess quantity above the tick mark is suctioned
off automatically such that exact dosing is ensured.
Care instructions ESTETICA E50
3 Replenish and check the disinfectant | 3.1 Replenish oxygenal
30/32
To Next Page