APPENDIX C
TEMPERATURE ADJUSTMENT
FOR YOUR KAYPRO 10
When
transporting
your KAYPRO 10
from
one
environment
to
another, some
time
may
be needed so
the
hard
disk
can
adjust
to
temperature
change.
Because some expansion and
contraction
will
occur
with
temperature
changes,
the
hard
disk
must
reach a
stable
temperature
before it can be used reliably.
The required
time
is
calculated
on 1
hour
of
waiting
time
for
each
18
degrees
Fahrenheit change in temperature.
Note: THE
WARM-UP MUST BE PERFORMED WITH THE POWER ON.
Two
tables
of
warm-up
times
will
be
found
on
the
following
page. One is
for
degrees Fahrenheit, and one is
for
degrees Celcius.
Example:
Your KAYPRO 10 has been in
your
car
trunk
at
45
degrees Fahrenheit dur-
ing a
business
trip. At your
destination
the
working
temperature
of
the of-
fice
is
70
degrees Fahrenheit. The difference in temperature is
25
degrees.
1.
Locate
25
degrees in the left-hand
column
of
the
Fahrenheit Table.
2.
In the right-hand
column
of
the
Fahrenheit Table is a
time
value
of
1
hr
and 25
minutes.
This is
the
warm-up
time
required before using
your
computer.
96
To Next Page
Loading...
