Kaypro 10 - Page 143

·',
/ ,
USING CHECK.COM
1. Go to drive A, user area O.
2. Call the program by typing: CHECK
Press RETURN.
There will be a copyright message stating that
it is suitable for use only on the KAY PRO 10.
During the following entries:
To back up to the previous prompt, press
ESC ap e-.
To return to the operating system from the
first entry, press ESCape.
Next, you will be asked:
FIRST DISK, LAST DISK? (0, 3)
3. Reply by typing: 1,1
Press RETURN.
Any other numbers wi II cause CHECK to attempt
to select and test non-existent disks 2 and 3.
There will be a message that the disk (that
isn't there) is not ready. Then CHECK wi II
give a 60-second countdown while it tries to
access the disk. Finally, you will be told
that you are either accessing a non-existent
disk or you have a serious problem.
The next prompt is:
FIRST HEAD, LAST HEAD? (0,7)
The KAYPRO only has heads 0 through 3. Numbers
greater than 3 wi II give a long string of error
messages.
• .)1)- '