Kaypro 10 - Page 61

)
)
On the right side of the display are the first 20 commands. Commands 1 through
5 are for groups of command headings; typing one of these numbers gives you
access to a group of commands:
FORMAT includes commands 18 through 28. You can name rows, name col-
umns, specify width and move columns, set decimals, etc.
DATA includes commands 30 thru 39. You can enter data, move data pointer, fix,
nullify, and go to.
MATH includes commands 40 through 58. You can add, subtract, multiply, divide
and perform all four operations with a constant, as well as round off, etc.
UTILITY includes commands 60 through 68. You can retrieve your table from a
disk, save data on a disk, clear all data, reset, list and erase.
PRINT includes commands 70 through 75. You can choose report options, print
reports on the printer, save to a disk file, etc.
To cancel a command, press the DELete key
4. Look at the Utilities by typing: 5
Press the RETURN key.
5. To load tables, type: 61
Press RETURN.
You will see:
TABLE NAME: *********
6. Type: SLS-FCST
Press RETURN .
An example will appear.
7. To change the numbers in any row or column, use command: 31
8. When prompted: CHOOSE (VALUES = 0, CONSTANT = 1,
GROW = 2, INCR = 3), type: 0
49