Kaypro 10 - Page 62

9. The cursor is indicated by the square brackets around a number. Move the
cursor, using the arrow keys
10. Type a number.
Press RETURN.
The number in the table wil be replaced with the number you have typed, and
the cursor will advance one column.
If the cursor disappears, it may have moved off the visible part of the spread-
sheet.
If you have been moving to the right, press the left arrow key
repeatedly until the cursor returns to view. If you have been moving down on
the spreadsheet, press the up arrow key repeatedly until the cursor returns
to view.
11. Once you have changed one or more numbers, you may automatically
recompute the entire table. Use command: 6
12.
If you wish to save the original table in addition to the revised table, give the
revised table a new name by typing command: 62
Otherwise, only the revised version will remain as SLS-FCST. If you give a new
name, you wi
II have two tables:
•
The sample, SLS-FCST
•
Your own version, named, for example, FCST-TWO
13. To end this demonstration, type the stop command: 9
14. When the command asks: VERIFY (Y OR N), type: y
See the Profit Plan manual for complete details for using the features of
ProfitPlan.
50