KEB COMBIVERT S6 Series

GB - 9
Control
2.2.1 Control terminal strip X2A
The control terminal block X2A is designed as double, plug-in terminal block with spring cage
connection. It contains 28 pole.
2.2.2 Safety terminal block X2B
The safety terminal block X2B is designed as double, plug-in terminal block with spring cage
connection. It contains 10 pole.
2.2.3 CAN terminal block X2C
The control terminal block X2C is designed as double, plug-in terminal block with spring cage
connection. It contains 4 pole.
2.2.4 Analog inputs X2D
The safety terminal block X2D is designed as double, plug-in terminal block with spring cage
connection. It contains 6 pole.
2.2.5 Diagnostic interface X4A
TheintegratedRS232/485interfaceservesfortheconnectionofservicetools(e.g.COM-
BIVIS)anddisplays.TelegramDIN66019IIisusedascommunicationprotocol.
2.2.6 Encoder interfaces X3A, X3B
DerCOMBIVERTcontainstwouniversalencoderinterfaces.Theinterfacescanbeadapted
independently by parameter to different encoder.