GB - 6
Preface
Selection of our units in view of their suitability for the intended use must be done generally
by the user.
Tests can only be done within the application by the machine manufacturer. They must
be repeated, even if only parts of hardware, software or the unit adjustment are modi-
ed.
Unauthorised opening and tampering may lead to bodily injury and property damage and
mayentailthelossofwarrantyrights.Originalsparepartsandauthorizedaccessoriesbythe
manufacturer serve as security. The use of other parts excludes liability for the consequences
arising out of.
Thesuspensionofliabilityisespeciallyvalidalsoforoperationinterruptionloss,lossofprot,
datalossorotherdamages.Thisisalsovalid,ifwereferredrsttothepossibilityofsuch
damages.
If single regulations should be or become void, invalid or impracticable, the effectivity of all
other regulations or agreements is not affected.
Through multitude applications not each possible case of installation, operation or mainte-
nance can be considered. If you require further information or if special problems occur which
are not treated detailed in the documentation, you can request the necessary information via
the local Karl E.Brinkmann GmbH agency.
1.4 Copyright
The customer may use the instruction manual as well as further documents or parts from it for
internal purposes. Copyrights are with KEB and remain valid in its entirety.
KEB
®
,COMBIVERT
®
,COMBICONTROL
®
andCOMBIVIS
®
are registered trademarks of Karl
E. Brinkmann GmbH.
Otherwordmarksor/andlogosaretrademarks(™)orregisteredtrademarks(®)oftheirre-
spectiveownersandarelistedinthefootnoteontherstoccurrence.
When creating our documents we pay attention with the utmost care to the rights of third par-
ties. Should we have not marked a trademark or breach a copyright, please inform us in order
to have the possibility of remedy.
1.5 Speciedapplication
TheCOMBIVERTS6servesexclusivelyforthecontrolandregulationofthree-phasemotors.
The operation of other electric consumers is prohibited and can lead to the destruction of the
unit. Frequency inverters are components which are intended for the installation in electric
systems or machines.
The used semiconductors and components of the Karl E.Brinkmann GmbH are developed
anddimensionedfortheuseinindustrialproducts.IftheKEBCOMBIVERTF5isusedin
machines, which work under exceptional conditions or if essential functions, life-supporting
measuresoranextraordinarysafetystepmustbefullled,thenecessaryreliabilityandsecu-
rity must be ensured by the machine builder.
The operation of our products outside the indicated limit values of the technical data leads to
the loss of any liability claims.