KEB COMBIVERT S6 Series

GB - 7
Preface
1.6 Product description
TheproductfamilyCOMBIVERTS6withsafetyfunctionSTOhasbeendevelopedforthe
use in safety-oriented applications. The basic standards as well as application and country-
specicstandardsmustbeobservedfurthermore.Thestandardsreferredinthismanualmust
be observed supplementary !
1.6.1 Overview of functions
Thecontrolprovidesthefollowingfunctions:
• hardware-installed supply of digital and analog inputs and outputs.
• Diagnostic interface
• Ethernet-basedeldbusinterface(EtherCAT/Varan)
• CANeldbusinterface
• Multi encoder interface
• KTY interface
• Brake control
• STOfunctionality
• StatusLED‘s
1.6.2 Safety function
ThesafetyfunctionSTOaccordingtoIEC61800-5-2contains:
• Safetorqueoff(SafeTorqueOff-STO)
Thesafetyfunctionmeettherequirementsinaccordancewithperformancelevele(ISO13849-
1)andSIL3(IEC61508andIEC62061).Incaseofproperprojectdesign,installationand
operation the safety function protects people against mechanical damages.
Attention Validityofcerticates
Thecerticationofcontrollerswithsafetytechnologyisonlyvalidifthemate-
rialnumbercorrespondswiththespeciednumericalcodeund the FS logo
is printed on the type plate.
Numericalcode:
SteuerungmitSTO-Funktion eingesetztin Steller
1KF6Kxx-xxxx FrequenzumrichterbisGehäuseE
(x=variabely=D,E)
xxF6Kxy-xxxx
2KF6Kxx-xxxx
FrequenzumrichterabGehäuseG
(x=variabely=G…W)
xxF6Kxy-xxxx