Keba KeControl CP 50 Series - Compliance and Standards; EU Directives, Conformity Standards, and Other Standards

CP 503/A, CP 505/A,D,K, CP 507/
A,C
Directives, standards and regulations
Project engineering manual V1.06
79
© KEBA 2021
13 Directives, standards and regulations
13.1 EU Directives
2014/30/EU EMC Directive
2011/65/EU RoHS Directive
13.2 Standards for checking the conformity
The following legally non-binding European standards were applied to
checking conformity with the directives.
Check of the conformity with the EMC Directive
EN 61131-2:2007
Programmable controllers - Part 2: Equip-
ment requirements and tests
EN IEC 61000-6-2:2019
Electromagnetic compatibility (EMC) - Part
6-2: Generic standards - Immunity standard
for industrial environments
EN IEC 61000-6-4:2019
Electromagnetic compatibility (EMC) - Part
6-4: Generic standards - Emission standard
for industrial environments
Check of the conformity with the RoHS Directive
EN IEC 63000
Technical documentation for the assessment of electri-
cal and electronic products with respect to the restric-
tion of hazardous substances
13.3 Other standards
In addition, the following legally non-binding European standards were con-
sulted in partial aspects during the development of the safety concept.
General procedure and safety principles
EN 61131-1:2003
Programmable controllers - Part 1: General
information
Information
This product is designed for use in industrial environments and may cause
radio interference in residential areas.