EasyManua.ls Logo

KEEWAY Vieste 250 - Braking; Stopping the Engine

KEEWAY Vieste 250
36 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
20
,,
RIDING INSTRUCTIONS
B
rakin
g
Wei
brakes
Washing the scooter or riding through water
or rain can delay the braking effect due to
wet
or
(
in
winter ) ice-covered brake discs
and linings.
& WARNING
The
bra
kes
must
first
be
operated
until
they are dry.
Salt film on the brakes
When
riding on salted streets without braki-
ng
for a while, the full braking effect may be
delayed.
---:
0
11
and grease
& WARNING
Th
e brake discs and linings must be free
of
oil and grease!
ti
the
scooter
is
not
used
for
a
wh
ile , a
rust
fil
m
may
form
on
th
e
brakes
and
th-
us
in
crease
the
braking
effect.
A
thick
r-
ust
film
can
cause
the
brakes
to
lock
up.
When
setting
out
on
a ride
after
a
long
l-
ay
-up
period,
carefully
operate
the
brak-
es several
ti
mes
until
they
work
normal-
ly.
~
NOTE
Make sure you practice bra
kin
g for emerge-
ncy situations, but do so where you will
not
pose a risk to yourse
lf
or
others(e.g.a dese-
rted parking area).
& WARNING
Operate the brakes to grind o
ff
the salt
deposited
on
the brake discs.
Dirty brakes
When riding on dirty streets,
th
e braking ef-
fect can be delayed due
to
dirty brake discs
an
d linings.
& WARNING
Operate
the
brakes
until
they
are
clea
n.
Lin
ing
wear
is
increased
by
dirty
brakes!
B
rakin
g
Braking
The front brake and
re
ar brake are operate-
d
in
dependently from each other.
The front brake
is
operated via the right-ha-
nd brake lever(1 )on the handlebars.and
th
e
rear brake is operated via the left-hand bra-
ke lever(2).
W
hen
stopping
or
sJo
wing
do
wn
.release the
th
ro
ttle gas and operate both brakes at the
same
time.
On tight curves, sand
y/
dirty streets,
we
t a-
sphalt and icy roads.use the front brake ca-
refully:
if
the front wheel locks , the bike will
slide sideways.
Brake with care.Locked wheels do not have
much braking effect and can lead to skiddi-
ng / crashin
g.
In
principle,do
not
brake on a
curve,
but
before the curve.
Braking on a curve increases the danger of
sliding.
RIDING INSTRUCTIONS
Stopping
th
e engi
ne
- Turn the ignition lock
(3)
with the ignition
key to the position'
~"
.
- Pull out the ignition key.
- '
fake
away the remote control key.
,.
i:.!
;,.
_
\
21

Table of Contents

Related product manuals