58
~
WA
RRANTY
Wa
rranty
conditions
In
case of
an
occurring fault we will provide
the customer with the following performanc-
es
through
the
authorized dealer (seller) wi-
thin the scope
of
its statutory warranty obli-
gations:
1.
Within warranty period, we will rectify a
ny
deficiencies caused by material
or
manu-
facturing faults throygh the authorized d-
ealer (seller)
by
repairing or replacing
the
affected part according to the statutory w-
arranty regulations. We may deny the re-
quested repair or replacement
of
the fau-
lty part if this would only be possible with
disproportionately high costs.In this case
we
re
ctify
the
deficiency through the aut-
horized
dealer
(seller)
by
applying the ot-
her possible type
of
subsequent fulfillme-
nt. If both types
of
subsequent fulfillment
are only possible with unproportionately
,_...-/
high costs, we deny the subsequent fulfi-
ll
men
t all-together through the authorzied
dealer (seller). The customer
is
then enti-
tled to legal claims. Replaced parts pass
ov
er
into the possession
of
us.
2. T
he
installation of spare parts wtthin the
scope of warranty does not extend the
war
ranty period that has Started with the
date of delivery of the motorcycle.
3.
Th
e warranty does not cover normal we-
ar
and
tear
caused by normal use as we-
ll
as
wear and tear caused by inappropri-
ate handling and inappropriate use. Oxi-
dation
and
corrosion are caused by envi-
ronmental influences and are also not co-
vered under
wa
rranty.
4.
Wa
rranty claims lodged by t
he
cuistomer
will
be
reiected in case of:
Ma
nipulations
to
the motorcycle, installation
of
a differe-
nt exhaust system, changes
to
the gear-
bo
x or secondary transmission ratio and
installation of accessories or spare parts
which have not been approved by us.
Repairs carried out in workshops not au-
thorized by
us
and the non-compfiance
with the maintenance intervals in
the
wo-
rkshop
of
an authorized dealer will also
cause the rejection of warranty claims.
5. When lodging a warranty claim the custo·
mer
must present the correctly filled
in
s-
ervice
bo
ok
to the seller.
6. The following table gives the customer
an
overvi
ew
of
the average limits
of
the
respective wear parts.
List
of
w
ea
r
pa
rts
W
ea
r
pa
rts
Tires, houses, rims
Wheels, hubs
Oils, air filter, leak.age inspection on
engine
Spring fork, spring strut
Lamps, incandescent bulbs, electric
system
Barke linings, brake shoes, brake lines
Seda! rings, sealants, O~rings
Radial seals on engine,
gea
rbox, fork and
w
heels
Wheel bearings, steering bear
in
gs
Swing a
rm
bearing
Cables
Coverings
~.:~
,
....
, ,,
,-·;..,~
"
WA
RRANTY
Wear limits
depending on riding style, load and tire pressure
the
wear limit
may
already be
reached after only 500 km
or
even earlier.
depending on riding style, load and tire pressure the we
ar
limtt
may
already be
reached a
ft
er only 1500 km
or
even earlier. Check during each maintenance.
O
xi
da
tion is a lack
of
maintenance!
during the first inspection, then with every maintenance intetVal(every 3000 krrv6000 km
).
Check
oi
l level before every ride.
Cle_an
ing / inspection during every maintenance.
depending on road
conditions/
unevenness
of
the
road surface
the
lifetime will be
reduced, this may already occur after 500 km.
depending on riding style and load these
may
already
be
worn after 1500 km,
in
cross-country operation even
ear
li
er
.
must
be
replaced d
ur
ing each maintenance interval to ensure proper function.
depending on road conditions and care w
ear
may
start after
500
km.
Dirt reduces the lifetime. Do not clean wnh a high pressure cleaner!
de
p
end
i
ng
on road conditi
ons
and care wear
ma
y start after
1500
km.
Soiling of the wheel hub reduces the lifetime.
Check during each maintenance interval,
do
not
clean wi
th
a h
igh
pressure cleane
r!
depending on load and care after 1500 km, check with every maintenance.
depending on care starting after
500
km.
Check
with ev
ery
maintenance.
Plastic parts will
be
damaged
by
caustic or penetrating cleaning agents or solvents.
59
To Next Page
Loading...
