KEEWAY Vieste 250 - Front Direction Indicator - Changing the Bulbs

44
.,,
NOTES ON MAINTENANCE
Headlight and pos i tion light
- Remove screw (8) and socket head cap s- - Remove screw (16 ), change the left and r-
crew (9), remove the left and right front s i- ight headlights if necessary.
de panels (10). • The left and right headlights are L ED light
- Remove screw (11) and screw (1 2), unpl- source, need to change the complete light.
ug the headlight connector (1 3), remove t-
he headlight fender (14) and headlight(15 ). Installation takes place in reverse order to
disassembly.
---
i
Front direction indicator
Changing the bulbs
e:i NOTE
Do not touch the bulbs with bare finge rs .
Hold bulbs with a clean, dry cloth when
installing or removing them.
Front turn signal li ght
bulbs: 6 LEDs 12V 2.88W
•:.?"••
- Tum off the ignition.
- Remove socket head cap screw (1 ), remo-
ve the windshield (2).
- Remove the screw (3), remove the front c-
en t ra l panel (4).
\)
... v I c~ vn IVll4.U't I Cl'1114.l'il\,.,c;
• Remove screw (5), remove front panel (6),
speedometer under cov er (7).
(
45