PROGRAM
COMMENTS
Recall default setup.
Select ACV function.
Continuous, GET trigger mode.
Select range.
Input range.
rrogram 199 range.
Z-pole ratio mode.
Step, channel 8 limit.
SRQ on data store full.
Scan interval is one second.
Store size = 8, turn on store.
Pause to make sure all is readv.
Trigger scan.
Get bus status.
Wait for SRQ on store full.
Serial poll to SRQ.
Reading, no prefii data format,
Readings from data store.
~~%et channel 1 reading.
Get gain readings.
Get reading.
Display gain value.
Loop back for next reading.
3-45
To Next Page
Loading...
Need help?
General