APPENDIX B
CONTROLLER PROGRAMS
The following programs have been supplied as a simple aid to the user and are not intended to
suit specific needs. Each program allows you to send a device-dependent command string to the
instrument and obtain and display an instrument reading string.
Programs for the following cor$ollers are included:
l IBM PC or AT(with National Instruments GPIB-PC IEEE-488 Interface)
l IBM PC or AT (with C+itol Equipment Corp. PC-488 Interface)
l Apple II (equipped with the Apple II IEEE-488 Interface)
l Hewlett-Packard Model 85
l Hewlett-Packard Series 200 and 3M)
l Hewlett-Packard Model 9825A
l DEC LSI 11
B-l
To Next Page
Loading...
Need help?
General