Keithley 199

IEEE-488 PROGRAMMING
:
Table 3-16. Scanner Programming Commands
Mode Command Description
~.~~ P=q=wh
Scanner Setup NO
All channels open
3.12.1
2-pole
j-pole
Nl 1 1
N2 2 2
N3 3 3
Liz 5 4 ~~ C-IAN 4 &AX ERROR
N6 6 CHAN 4 MAX ERROR
K3 7 8 CHAN CHAN 4 4 MAX MAX ERROR ERROR
iEt
Step mode
Stop scan, all channels open
2-Pole Limit
4-Pole Limit
Nil 1 1
Nl2
:ii : 4 z
Nl.5
N16 2
CHAN 4 M?AX ERROR
CHAN 4 MAX ERROR
iii
s’
CHAN 4 MAX ERROR
CHAN 4 MAX ERROR
N19
CHAN 8 MAX ERROR
CHAN 4 MAX ERROR
N20
Stop scan, all channels open
2-Pole Limit
4-Pole Limit
N21 : 1
N22 2
Lizi 3 4 3
N25 5 CHAN 4 :AX ERROR
N26 6 CHAN 4 MAX ERROR
~~
;
CHAN 4 MAX ERROR
CHAN 4 MAX ERROR
Pole/Ratio
Scan Interval
Trigger Delay*
00 2-pole
01 4pole
02 2-pole ratio
03 4pole ratio
QO
Defatit l75msec interval (SELECT OFF)
Q*
n=interval in rnsec (l5c999999msec)
Wn
n=delay in msec (0~999999msec)
3.12.2
3.12.3
3.12.4
‘Delay to be used as channel settling time.
3-37