Keithley 2000 Quick Reference Guide

41
:CONTinuity
:THReshold <NRf>
:THReshold?
Path to configure continuity test:
Set threshold resistance (1 to
1000).
Query threshold resistance.
Table 11. STATus command summary
Command Description
:STATus
:MEASurement
[:EVENt]?
:ENABle <NRf>
:ENABle?
:CONDition?
:OPERation
[:EVENt]?
:ENABle <NRf>
:ENABle?
:CONDition?
:QUEStionable
[:EVENt]?
:ENABle <NRf>
:ENABle?
:CONDition?
:PRESet
:QUEue
[:NEXT]?
:ENABle <list>
:ENABle?
:DISable <list>
:DISable?
:CLEar
Path to control measurement event reg-
isters:
Read the event register.
Program the enable register.
Read the enable register.
Read the condition register.
Path to control operation status regis-
ters:
Read the event register.
Program the enable register.
Read the enable register.
Read the condition register.
Path to control questionable status reg-
isters:
Read the event register.
Program the enable register.
Read the enable register.
Read the condition register.
Return status registers to default states.
Path to access error queue:
Read the most recent error message.
Specify error and status messages for
queue.
Read the enabled messages.
Specify messages not to be placed in
queue.
Read the disabled messages.
Clears all messages from Error
Queue.
Table 10. SENSe command summary (cont.)
Command Description
2000-903-01A Page 41 Thursday, December 23, 1999 7:52 AM

Keithley 2000 Specifications

General

Digits	6.5
DC Voltage Range	100 mV to 1000 V
AC Voltage Range	100 mV to 750 V
Resistance Range	100 Ω to 100 MΩ
Connectivity	IEEE-488 (GPIB)
Display Type	VFD