Keithley 2000 - Page 43

40
:FREQuency
:APERture
:APERture?
:THReshold
:VOLTage
:RANGe <n>
:RANGe?
:REFerence <n>
:STATe <b>
:STATe?
:ACQuire
:REFerence?
:DIGits <n>
:DIGits?
Path to configure frequency.
Sets gate time for period measure-
ments (0.01-1.0s).
Query period gate time.
Path to select the threshold volt-
age range:
Select threshold range (0 to
1010).
Query threshold range.
Specify reference (0 to 1.5e7)
Enable or disable reference.
Query state of reference.
Use input signal as reference.
Query reference value.
Specify measurement resolution
(4 to 7).
Query resolution.
:PERiod
:APERture
:APERture?
:THReshold
:VOLTage
:RANGe <n>
:RANGe?
:REFerence <n>
:STATe <b>
:STATe?
:ACQuire
:REFerence?
:DIGits <n>
:DIGits?
Path to configure period.
Sets gate time for period measure-
ments (0.01-1.0s).
Query period gate time.
Path to select the threshold volt-
age range:
Select threshold range (0 to
1010).
Query threshold range.
Specify reference (0 to 1).
Enable or disable reference.
Query state of reference.
Use input signal as reference.
Query reference value.
Specify measurement resolution
(4 to 7).
Query resolution.
:DIODe
:CURRent
:RANGe
[:UPPer] <NRf>
[:UPPer]?
Paths to configure diode test:
Path to select range.
Select range (0 to 1e-3)
Query range.
Table 10. SENSe command summary (cont.)
Command Description
2000-903-01A Page 40 Thursday, December 23, 1999 7:52 AM