Keithley 2000 Quick Reference Guide

44
Table 15. TEMPerature command summary
Command Description
:UNIT
:TEMPerature <name>
:TEMPerature?
:VOLTage
:AC <name>
:DB
:REFerence <n>
:REFerence?
:DBM
:IMPedance <n>
:IMPedance?
:AC?
[:DC] <name>
:DB
:REFerence <n>
:REFerence?
:DBM
:IMPedance <n>
:IMPedance?
:DC?
Select temperature measurement
units (C, F, or K).
Query temperature units.
Path to configure voltage units.
Select ACV measurement units
(V, DB or DBM).
Path to set DB reference volt-
age.
Specify reference in volts
(1e
-7
to 1000).
Query DB reference.
Path to set DBM reference
impedance.
Specify reference imped-
ance (1 to 9999).
Query DBM reference
impedance.
Query ACV units.
Select DCV measurement units
(V, DB, or DBM)
Path to set DB reference volt-
age:
Specify reference in volts (0
to 1000).
Query reference.
Path to set DBM refernece
impedance:
Specify reference imped-
ance (1e
-7
to 9999).
Query reference impedance.
Query DCV units.
2000-903-01A Page 44 Thursday, December 23, 1999 7:52 AM

Keithley 2000 Specifications

General

Digits	6.5
DC Voltage Range	100 mV to 1000 V
AC Voltage Range	100 mV to 750 V
Resistance Range	100 Ω to 100 MΩ
Connectivity	IEEE-488 (GPIB)
Display Type	VFD