52
GET (cont.) G10
G11
Get closed channel number
String = 10nn
Where: nn =
00 (all open)
01 through 10 (closed
channel)
Get simulated reference
junction temperature
String = xx.xxx (in °C)
Note: G2 valid only in cali-
bration mode.
PUT P0
P1
P4
Put instrument configuration
(function, range, speed,
trigger)
Put SRQ mask
Set simulated junction tem-
perature; 0 to 50 (°C)
Default temperature = 23°C
PUT format N <value> P0
N <value> P1
N <value> P4
Thermocouple
type
K0
K1
K2
Type J thermocouple
(default)
Type K thermocouple
Type T thermocouple
Temperature unit J0
J1
J2
°C (default)
K
°F
Thermocouple
reference junction
M0
M1
Select simulated junction
(default)
Select real junction (channel
1 for 2001-TCSCAN card)
Table 17. Models 8840A/8842A device-dependent
command summary (cont.)
Mode Command Description
2000-903-01A Page 52 Thursday, December 23, 1999 7:52 AM
To Next Page
Loading...
