Keithley 2601B

Series 2600B
System SourceMeter® Instrument Reference Manual Section 5:
Introduction to TSP operation
2600BS-901-01 Rev. B / May 2013 5-9
localnode.passwordmode (on page 7-141)
Miscellaneous
delay() (on page 7-49)
exit() (on page 7-88)
localnode.autolinefreq (on page 7-137)
localnode.linefreq (on page 7-139)
localnode.password (on page 7-140)
localnode.passwordmode (on page 7-141)
makegetter() (on page 7-145)
makesetter() (on page 7-146)
meminfo() (on page 7-147)
opc() (on page 7-150)
waitcomplete() (on page 7-380)
Parallel script execution
dataqueue.add() (on page 7-45)
dataqueue.CAPACITY (on page 7-46)
dataqueue.clear() (on page 7-46)
dataqueue.count (on page 7-47)
dataqueue.next() (on page 7-48)
node[N].execute() (on page 7-148)
node[N].getglobal() (on page 7-148)
node[N].setglobal() (on page 7-149)
tsplink.group (on page 7-351)
tsplink.master (on page 7-352)
tsplink.node (on page 7-352)
Queries and response messages
You can use the print(), printbuffer(), and printnumber() functions to query the
instrument and generate response messages. The format attributes control how the data is formatted
for the print functions used.
The localnode commands determine if generated errors are automatically sent and if prompts are
generated.
format.asciiprecision (on page 7-92)
format.byteorder (on page 7-93)
format.data (on page 7-94)
localnode.prompts (on page 7-141)
localnode.prompts4882 (on page 7-142)
localnode.showerrors (on page 7-145)
print() (on page 7-152)
printbuffer() (on page 7-153)
printnumber() (on page 7-156)