Section 5: Capturing high power pulse waveforms Model 2651A High Power System SourceMeter® Instrument User's Manual
5-10 2651A-900-01 Rev. A / March 2011
An example call to this function is as follows:
CapturePulseI(50, 300e-6, 50, 5)
This call will output five 50 A pulses with a 300 μs pulse width. The pulses will be limited to 10 V and
have a 1% duty cycle. At the completion of the pulsed outputs, the SMU output is turned off. The
resulting data from this test will be returned in a Microsoft
®
Excel
®
compatible format (you can cut and
paste the output from the console) that can be used for graphing and analysis.
To Next Page
Loading...
