Keithley DMM6500 User Manual

Section
4: TSP command reference DMM6500 6½-Digit Multimeter with Scanning
Calibration and Adjustment Manual
4-4 DMM6500-905-01 Rev. E June 2021
cal.adjust.step.setup()
This function sets up the specified adjustment step.
Type TSP-Link accessible Affected by Where saved Default value
Function Yes
Usage
cal.adjust.step.setup(stepname)
cal.adjust.step.setup(stepname, value)
stepname
The adjustment step to start
value
The value for this adjustment step. If using the default then value is optional
Details
This command generates an error if:
• Calibration is locked
• The step does not complete successfully
• The value that is passed is invalid for the step, out of range, or not needed
Also see
cal.lock() (on page 4-6)
cal.unlock() (on page 4-9)

Keithley DMM6500 Specifications

General

Resolution	6.5 digits
DC Voltage Range	100 mV to 1000 V
AC Voltage Range	100 mV to 750 V
DC Current Range	10 µA to 10 A
AC Current Range	10 µA to 10 A
Temperature Range	-200 °C to 1820 °C
Display	5-inch capacitive touch screen
Resistance Range	100 MΩ
Frequency Range	3 Hz
Sampling Rate	1 MS/s
Connectivity	USB, LAN, GPIB (optional), TSP-Link
Memory	7 million readings