Keithley DMM6500 User Manual

DMM6500
6½-Digit Multimeter with Scanning Calibration and Adjustment Manual Section 4:
TSP command reference
DMM6500-905-01 Rev. E June 2021 4-5
cal.adjust.step.execute()
This function executes the specified adjustment step.
Type TSP-Link accessible Affected by Where saved Default value
Function Yes
Usage
cal.adjust.step.execute(stepname)
cal.adjust.step.execute(stepname, value)
stepname
The adjustment step to start
value
Value for this adjustment step. If using the default then value is optional
Details
This command generates an error if:
• Calibration is locked
• The step does not complete successfully
• The value that is passed is invalid for the step, out of range, or not needed
Also see
cal.lock() (on page 4-6)
cal.unlock() (on page 4-9)

Keithley DMM6500 Specifications

General

Resolution	6.5 digits
DC Voltage Range	100 mV to 1000 V
AC Voltage Range	100 mV to 750 V
DC Current Range	10 µA to 10 A
AC Current Range	10 µA to 10 A
Temperature Range	-200 °C to 1820 °C
Display	5-inch capacitive touch screen
Resistance Range	100 MΩ
Frequency Range	3 Hz
Sampling Rate	1 MS/s
Connectivity	USB, LAN, GPIB (optional), TSP-Link
Memory	7 million readings