7½ Digit Multimeter User's Manual Section 2: Using the front-panel interface
DMM7510-900-01 Rev. B / May 2015 2-3
TRIGGER key
Accesses trigger-related settings and operations. The action of
the TRIGGER key depends on the instrument state.
REMOTE LED
indicator
Illuminates when the instrument is controlled through a remote
interface.
LAN LED indicator
Illuminates when the instrument is connected to a local area network
(LAN).
1588 LED indicator
Illuminates when the instrument is connected to an IEEE-1588
compliant device.
1588 functionality is not supported at this time. This functionality will be made available with a
firmware update. See the Model DMM7510 Release Notes on the Keithley Instruments website
(http://www.keithley.com) for details.
SENSE terminals
Use the SENSE HI and SENSE LO terminals and the INPUT
terminals with the 4-wire resistance, 3-wire and 4-wire RTD
temperature, and DC voltage ratio functions.
Use the INPUT HI and INPUT LO terminals for all measurements
except current.
Use the AMPS connection with the INPUT LO terminal to measure
≤3A DC or AC
rms
current.
北京海洋兴业科技股份有限公司（证券代码：839145）
To Next Page
Loading...
Need help?
General
