Promig 530 / 0612 – 3© kemPPi oy
1. PREFACE
1.1. INTRODUCTION
Congratulations on having purchased this product. Properly installed Kemppi products should
prove to be productive machines requiring maintenance at only regular intervals. This manual is
arranged to give you a good understanding of the equipment and its safe operation. It also contains
maintenance information and technical specications. Read this manual from front to back before
installing, operating or maintaining the equipment for the rst time. For further information on
Kemppi products please contact us or your nearest Kemppi distributor.
The specications and designs presented in this manual are subject to change without prior
notice.
In this document, for danger to life or injury the following symbol is used:
Read the warning texts carefully and follow the instructions. Please also study the Operation safety
instructions and respect them when installing, operating and servicing the machine.
1.2. PRODUCT INTRODUCTION
Promig 530 is wire feeder designed for demanding professional use.
Versatile and easy to use operation functions of PROMIG units have been realized with
interchangeable control panels which point out different characteristics:
MC: basic controls and displays for MIG/MMA welding, Selecto memories
ML: basic controls and displays for MIG/MMA welding,Synergic MIG/PULSED MIG
MXE: versatile adjustments for synergic MIG/Pulsmig and MIG/MMA welding
Operations of wire feed unit are controlled and adjusted with microprocessor. Tacho generator of
wire feed motor enables accurate and even adjustment of wire feed speed.
These operation instructions handle Promig 530 wire feed unit, assembly and installation of MIG
system as well as operation functions of panels.
This equipment’s electromagnetic compatibility (EMC) is designed for use in an
industrial environment. Class A equipment is not intended for use in residential location
where the electrical power is provided by the public low-voltage supply system.
To Next Page
Loading...
Need help?
General
