01/28/02
Page 4
Install
Kent Pad Printer Canada Inc.
Leveling the machine.
Since floor surface levels vary to a great
de
ree, it is important to level the machine
before starting any adjustments.
d
ust the 4 levelin
screws located at the
base of machine stand.
Mechanical
Please disconnect the main power supply
before attempting any machine maintenance.
For the maintenance procedure, refer to the
Maintenance Section.
Installation
Pneumatic
Connecting main air and related pneumatic equipment.
1. Connect main air supply to the pressure regulator of machine.
2. Set operational pressure to 6 bar.
Pressure regulator
Valve to
increase/decrease
pressure
Connect air
supply here
Read
pressure
here
To Next Page
Loading...