Digital Radio
49English
Digital Radio
(DDX9020DABS / DDX920WDABS / DMX8520DABS)
Digital Radio Basic Operation
Most functions can be controlled from the
source control screen.
To enter Digital Radio source, touch [Digital
Radio] icon in the source selection screen.
(P.17)
NOTE
• Set the remote control mode switch to AUD
mode before starting operation, see Switch the
operation mode (P.87).
Control screen
8
7
5
2
6
4
3
Open the drawer
1
6
8
Close the drawer
6
9
8
7
2
1
Indicator display
Displays the received signal strength.
2
Information display
• Displays the information on the current station:
Service Name
Touching [ ] allows you to switch between
Content A, Content B and Content C.
Content A: DLS, PTY Genre
Content B: Song Title, Artist Name, Ensemble
name
Content C: Now Playing, Next Program, Audio
Quality
Touch to switch between the Control and
Information screen.
• Change the text size of information when the
"Small Audio Text" is set to "ON"/"OFF" in the
User Interface screen (P.71).
3
Seek mode
Touch to switch seek modes in the following
sequence: [AUTO1], [AUTO2], [MANUAL].
• [AUTO1]: Tunes in a ensemble with good
reception automatically.
• [AUTO2]: Tunes in the memorized ensemble
one after another.
• [MANUAL]: Switches to the next ensemble
manually.
4
Indicator display
P#: Preset number
CH#: Channel display
5
Operation keys
• [1] : Displays the Service List screen. For details
on search operation, see Service search
(P.51).
• [E] [F] : Tunes in a ensemble, service, and
component. The seek mode switching can be
changed. (see
3
Seek mode).
• [
] : Touch to mute or not to mute.
6
Preset list
• Touching [
]/[ ] allows you to change the
display size.
• Recalls the memorized service.
• When touched for 2 seconds, stores the
currently being received service in the memory.
To Next Page
Loading...
