Kenwood DMX8520DABS User Manual

Digital Radio
50
7
Artwork area/VU meter
• Displays/hides artwork area.
• The picture data is displayed if available from
current content.
• Touch to switch between the artwork and VU
meter.
8
Function panel
Touch the left side of the screen to display the
function panel. Touch again to close the panel.
• [TI]: Selects the traffic information mode. For
details, see Traffic Information (P.51).
• [SETUP]: Displays the Digital Radio SETUP
screen. For details, see Digital Radio SETUP
(P.52).
• [PTY]: Searches for a program by program
type. For details, see Search by program type
(P.50).
• [DLS]: Display the Dynamic Label Segment
screen.
9
Indicator Items
• [DAB+]: Digital Radio is being received.
• [RDS]: Radio Data System is being received.
• [MC]: Receiving service is displayed.
White: Primary Component is received.
Orange: Secondary Component is received.
• [TI]: Indicates the reception state of traffic
information.
White: TP is being received.
Orange: TP is not being received.
Storing Service in Preset
Memory
You can store the current receiving service in
the memory.
1
Select a service you wish to store in
memory.
2
Touch [ ] on the right side of the screen.
3
Touch [P#] (#:1-15) in which you want to
store the station for 2 seconds until a
beep sounds.
Selecting Operation
Ñ Search by program type
You can tune in the station broadcasting the
specified type of program when listening to
Digital Radio.
1
Touch [ ] on the left side of the screen.
Touch [PTY].
 PTY Search screen appears.
2
Select a program type from the list.

Kenwood DMX8520DABS Specifications

General

Brand	Kenwood
Model	DMX8520DABS
Category	Car Video System
Language	English