Basic Operations
9English
Number Name Motion
6
G
• Displays the Angle Adjust screen.
– [DISC EJECT]: Ejects the disc.
• When the panel is opened, closes the panel.
• To forcibly eject the disc, press it for 2 seconds and then touch [DISC EJECT] after the
message is displayed.
7
Remote
Sensor
• Receives the remote control signal.
8
CAM • Switches view camera display on/off.
The camera whose view is displayed first changes according to the "Camera Setup"
setting and the shift lever position in the shift gate. The camera whose view was
displayed last is kept and the same camera view will be displayed the next time. If its
assignment setting is changed, the rear camera view is displayed.
9
Disc insert
slot
• A slot to insert a disc media. (Except DMX820WS)
DDX9020DABS / DDX8020S
9
1 2 3 4 5 6 7
DMX8520DABS / DMX8020S
1 2 8 4 5 6 3
NOTE
• The panels shown in this manual are examples used to provide a clear explanation of operations. For this reason,
they may be different from the actual panels.
Number Name Motion
1
Remote
Sensor
• Receives the remote control signal.
2
S, R
(Volume)
• Adjusts the volume.
The volume will go up to 15 when you keep pressing R. (P.13)
To Next Page
Loading...
Need help?
General
