Use the navigation buttons to select setting
< errlow>.
Confirm on ➔ button, the numeric input window appears.
The active digit is flashing.
Enter the lower tolerance (for numerical entry, see chap.
3.2.2) and confirm the entry.
The balance returns to the < Errlow > menu.
Press repeatedly -button to exit menu.
Finished the setting works, the weighing balance will be ready
for target counting.
2. Start tolerance check:
Determine the average item weight, see chap. 9.2.1.
Place the weighed material and check by means of the tolerance marks / acoustic
signal if the weighed material is within the defined tolerance.
Load below specified
tolerance
Load within specified
tolerance
Load exceeds specified
tolerance
To Next Page
Loading...
