DAB-BA-e-1813 29
10 Define drying parameters
In chapter 9 you have already carried out a first measurement with the factory
settings.
The device provides a great variety of setting options that allow you to adapt a drying
method to your sample.
Three heating profiles (standard drying, soft drying, fast drying) and three switch-off
criteria (time-controlled, automatic, manual) can be selected.
1. Enter ident number for drying method
16 memory locations, which can be simply called up and started as necessary under
the saved ident number (0 –F), are available for complete drying methods.
After pressing the first ident number <0> will be displayed.
This memory location is provided for the factory settings (standard drying
120°C, automatic switch-off) and cannot be changed.
Use the arrow keys to select the desired ident number and
confirm by . The currently set heating profile flashes.
To Next Page
Loading...
Need help?
General
