DAB-BA-e-1813 35
11 Carrying out drying and measuring processes
In order to obtain exact results, the instrument must have reached its
operating temperature (see warm-up time chap. 1). For this warm-up
time the instrument must be connected to the power supply.
Either invoke a drying method stored beforehand or set drying
parameters as specified in chapter 10.
After pressing the button the first ident number <0> of a drying method
will be displayed.
Use arrow keys to select a desired ident number of a drying
method and confirm by . The currently set heating profile flashes.
To Next Page
Loading...
