KERN EW User Manual

4.5 Resetting Address Data (Coefficients)
When memories of address data are changed or lost by some reasons, such as by
replacement of PCB, or by noises or static electricity, re-set original data by following
procedure.
1. Location Of Original Data
2. Contents Of Data Sheet
- 18 - EW_EW-C_EG_N-SH-e-0722

KERN EW Specifications

General

Display	LCD
Minimum part weight at piece counting (Laboratory scale)	0.1 g
Weighing plate material	stainless steel
Measuring system	Strain gauge
Interface	RS 232
Calibration	External calibration
Power Supply	AC adapter or 4xAA batteries
Units	g lb oz