KERN EW User Manual

5.5 Sequence Of Tuning-Fork Sensor Replacement
5.5.1 How to uninstall Tuning-fork assy
(1) Remove the mechanical unit from the chassis.
(2) Replace the tuning-fork sensor.
(3) Insert shim at stopper.
(4) While holding guide link down to under direction, tighten screws.
(Need the torque 25kgfcm)
- 36 - EW_EW-C_EG_N-SH-e-0722

KERN EW Specifications

General

Display	LCD
Minimum part weight at piece counting (Laboratory scale)	0.1 g
Weighing plate material	stainless steel
Measuring system	Strain gauge
Interface	RS 232
Calibration	External calibration
Power Supply	AC adapter or 4xAA batteries
Units	g lb oz