KERN EW User Manual

5.2 How To Cover The Case
5.2.1 EW 120-1200 and EW-C
(1) Cover the scale with the case, seeing cables are just stored inside
properly. Insert the rear hooks first, then press the upper case gently
until two front hooks are set securely.
(2) Drive in case fixing screw securely.
(3) Set pan base and then weighing pan on the scale.
5.2.2 EW 2200-12K
(1) Put the case on properly catching connection codes.
(2) Insert the case fixing screw with a (+) screwdriver. (2 places in top and
1 place in the chassis).
(3) Install the pan base and put the weighing pan on.
- 29 - EW_EW-C_EG_N-SH-e-0722

KERN EW Specifications

General

Display	LCD
Minimum part weight at piece counting (Laboratory scale)	0.1 g
Weighing plate material	stainless steel
Measuring system	Strain gauge
Interface	RS 232
Calibration	External calibration
Power Supply	AC adapter or 4xAA batteries
Units	g lb oz