30 PNJ_PNS-BA-e-1612
7 Basic Operation
7.1 Start-up
As soon as the balance is supplied with energy, the
indicator [ ] is displayed.
To switch on press the ON/OFF button.
All symbols of the display light up shortly.
The balance is ready for weighing when the weight
display appears.
7.2 Switch into stand-by mode
Press ON/OFF button, the display disappears
The indicator [ ] will be shown.
In stand-by mode the balance is ready for operation immediately after
switching-on without warm-up time.
To switch off the balance completely, separate it from the mains.
The balance starts in the mode, in which it has been switched off.
To Next Page
Loading...
