Key-Disp KD51C-U - Switching Push-Assist Mode On;Off; Switching the Lighting On;Off

4
Display interface
◆Switching Push-Assist Mode On/Off
To activate the push-Assist function, keep holding the “-” button. The E-bike’s is
activated to go at a uniform speed of 6 Km/h while ‘ WALK’ is shown on the display screen.
The push-Assist function is switched off as soon as you release the “-” button on the
operating unit.
Push-Assist Mode
▉ Push-Assist function may only be used when pushing the E-bike. Be aware of danger of injury
when the wheels of the E-bike do not have ground contact while use the push- Assist function.
◆
Switching the Lighting On/Off
To switch on the lights (headlights, taillights and display backlight), press the “ ”
button. Likewise, press the “ ” button again; the lights can be switched off.
If the headlights or taillights are independent of “ ” button, the “ ” button can only
be used as display backlight switch.
Switch the Lighting On/Off Interface