■ when an error code appears, please repair the fault. Or you will not be able
to ride the bike normally.
Settings( DisPlay Setting)
Press the power button to switch on the display.To access settings page, hold both the “+
and -” button for 2s.
Settings Interface.
Note: all the settings must be done to a parked bike with no spe
●DisPlay Setting
◆
Trip Reset
Trip Reset represents trip distance clearance setting. *And at the same time, Max. Speed,
AVG Speed, Trip time will be cleared as well.Press the “+” button or the “-” button to select Yes
or No. To confirm and store a changed setting, press the “on/off” button. When display or E-bike
system is off, the above data will not be cleared automatically. The default setting is “TRIP Rest-
NO”
Or Hold “on/off” button to return to home page or press BACK to return home page.
Trip reset interface
◆Toggle unit
Toggle Unit represents change unit between Metric and Imperial . The default is
To Next Page
Loading...
