User Manual
SUPM1
page 92 of 94© KEYMILE December 2015 EN/LZTBU 372 129/1 RC
94
User Interface Reference
External Request Request Release
Automatic trail selection.
Force Working
Force the selector to use the trail from the a-end
working remote CTP.
Force Protecting
Force the selector to use the trail from the a-end
protecting remote CTP.
Manual Working
Prefer the trail from the a-end working remote
CTP. Use this trail only if the fault status is not
worse than the fault status of the protecting trail.
Manual Protecting
Prefer the trail from the a-end protecting remote
CTP. Use this trail only if the fault status is not
worse than the fault status of the working trail.
Table 55: AP: / unit-x / port-y, Status - CTP (continued)
Operation Name Parameter Name Range Description / Details
To Next Page
Loading...