Keysight Models 6811C, 6812C, and 6813C Quick Start Guide 19
Use ▲ or ▼ to
navigate between
the Address
function
commands
ADDRESS <value>
Use keypad to key
in an exact value,
alternatively use ▲
to increment or ▼
to decrement.
Press [Enter] to
save.
Set the GPIB address.
BAUDRATE 1200 |
2400 | 4800 | 9600
Use ▲ or ▼ to
navigate between
1200 | 2400 | 4800
| 9600. Press
[Enter] to save.
Select the baud rate.
PARITY NONE |
EVEN | ODD
Use ▲ or ▼ to
navigate between
NONE | EVEN |
ODD. Press [Enter]
to save.
Select message parity.
---
Display system error codes stored in the
SCPI error queue. If no errors exist, a 0 is
displayed. The Err annunciator is lit when
there are errors.
---
Return the ac source into a previously
saved state. Up to 16 states can be
recalled (0-15).
---
Save an existing ac source state in
nonvolatile memory. Up to 16 states can
be saved (0-15).
System
key press
Function
key press
Function
command on the
front panel
display
Entry
key press
Description
To Next Page
Loading...
Need help?
General
