Keysight E5061B Network Analyzer 31
Installation
Initial Registration of E5061B
Step 4. After a while, the E5061B restarts automatically.
Windows XP Pro for Embedded Systems (HDD Rev KY22x and above)
Step 1. Turn on the E5061B. Do not touch any key on the front panel during boot up.
Step 2. The screen as shown in the Figure 1-8 appears. Select Windows XP
Professional and press [Enter].
Figure 1-8 System Start up screen in Windows XP Pro for Embedded Systems (1/2)
Step 3. The screen as shown in the Figure 1-9 appears. Press [Enter].
After several seconds, the next screen appears automatically even if you
do not press any key.
To Next Page
Loading...
Need help?
General
