Keysight E5061B Network Analyzer 45
Troubleshooting
System Recovery
Step 8. The progress of the system configuration is displayed on the screen. The
recovery takes a few minutes depending on the amount of data.
Figure 2-9 System configuration progress screen
Step 9. Once the recovery process is completed, completion message prompts. Click
OK. The E5061B restarts automatically.
Figure 2-10 Recovery Option confirmation dialog box
Step 10. After the restart, execute initial registration. For information on the execution
procedure, refer to “Initial Registration of E5061B” on page 29.
Step 11. Execute the calibration of the touch screen. For information on the execution
procedure, refer to “Calibration of the Touch Screen” on page 37.
Never turn off the power during the system recovery because doing so
may cause serious damage to the E5061B.
To Next Page
Loading...
Need help?
General
