Keysight 11683A - Operating Environment; Bench Operation; Rack Mounting; Storage and Shipment

Installation 2
Keysight 11683A Operating and Service Manual 23
Operating Environment
The instrument is designed for Indoor use only. The instrument may be operated at temperatures
from 0 °C to +55 °C at altitudes up to 4600m (15,000ft.). The instrument may be operated in
environments up to 95% relative humidity to 40 °C, but should be protected from temperature
extremes which may cause condensation.
Bench Operation
The instrument is equipped with plastic feet and a tilt stand for use on a bench.
Rack Mounting
The instrument can be rack mounted by using an adapter frame. The adapter frame is a rack frame
that accepts several combinations of sub-modular units. For additional information, address
inquiries to your nearest Keysight office.
Storage and Shipment
The instrument should be stored in a clean dry environment. The following environmental
limitations apply to both storage and shipment:
– Temperature: -40 to +75°C
– Humidity: < 95% relative
– Altitude: < 25,000 feet
Figure 2-1 Power inlet
CAUTION
This instrument is designed for use in Installation Category II and Pollution Degree 2 per
IECJOJO and 644 respectively.
- Fuses 6.3 × 32 mm
- Voltage selector 100/120/230/240 V